Fibertec Textile Guard Eco RT Spray Impregnation

Textile Guard Eco RT by Fibertec is a fluorine-free, polymer-based spray impregnation. The formula of the dirt- and water-repellent impregnation achieves a beading effect even when dried at room temperature. Heat treatment in the tumble dryer or with the iron is not necessary anymore.

Unlike many conventional fluorine-free products, Fibertec Eco Line waterproofing agents do not build a closed film on textile surfaces, but open, cross-linked structures. This preserves the water-repellent properties and breathability of membrane clothing. Ideal for re-waterproofing while preserving the functionality.

Directions for use:
Fibertec Textile Guard Eco RT waterproofing spray is suitable for almost all types of waterproof and breathable technical clothing with membranes or coatings (e.g. Gore-Tex, Sympatex, Texapore, Hyvent, Ceplex, Dermizax, etc.). For hardshells, softshells, rain jackets, rain trousers, motorbike clothing, ski clothing, sailing clothing. Also suitable for G-1000 and other poly-cotton textiles.

Before waterproofing, wash the garment with "Fibertec PRO WASH ECO" (prod. code 2283282) and allow to drain well. For waterproofing, spray a thin layer of TEXTILE GUARD ECO RT on the outer fabric, spread evenly over the fabric with a sponge and rub into the fabric. Hang the garment on a wide hanger and leave to dry at room temperature for at least 12 hours. 120 to 150 ml Fibertec waterproofing spray is sufficient for approx. 1 jacket in size L.

Details:
• PFC-free spray impregnation
• Optimised for breathable technical clothing
• Strongly water-repellent effect
• Retains the breathability of the waterproof membrane
• Activates at room temperature
• Water-based raw materials
• Without solvents
• Free from per- and polyfluorinated chemicals
• Polymer active substance
• Bottle made from 100% recycled plastic
• Contains no microplastics
• Vegan formula
• Highly concentrated and economical (sufficient for 4-5 textiles)
• Available as spray bottle and refill bag

Technical details:
• Volume: approx. 500 ml

In the box:
• 1 Fibertec Textile Guard Eco RT impregnation (PLEASE CHOOSE between 500 ml bottle or 500 ml refill pack)

Attention:
Before use, please follow the manufacturer's care instructions. If necessary, first check compatibility on a concealed spot.



Manufacturer: Fibertec GmbH, Friedrich-Krupp-Str. 14, 40764 Langenfeld, Deutschland, www.fibertec.info